Jaw Crushers: Yagnam Pulverizer Pvt. Ltd.
Modern Design For….
Higher Output Low Power Consumption Easier Operation
The body of our Jaw Crushers Mills are fabricated from best quality ultrasonically tested steel plates (IS 2062). The jaw crushers manufactured by us are designed to minimize vibrations and maximize its strength. These well designed jaw crushers have enabled us to stand amongst leading jaw crushers manufacturers. Additionally, reasonable prices of our jaw crushers mills have placed us in midst of most progressive crushers machine suppliers.
CHARACTERISTIC
Main Frame Body : "YAGNAM" Crushers bodies are fabricated from high class quality ultrasonically tested steel plates (IS 2062). Ribs are provided along the line of stress to give maximum strength and minimize vibration.| Eccentric Shaft : An EN series Carbonsteel shaft is
used, which is finished to a high degree of accuracy to give an exact
stroke to the swing jaw. The raw material is ultrasonically tested
& then hardened to ensure a long life. Roller Bearing : Heavy duty self-aligning sperical double roller are fitted to give smooth and economical running of the machine. The bearing used withstand very heavy loads and fluctuations on the line of action of the shaft. Jaw Stock : The Jawstock (levers) is made of high quality cast steel castings (IS 1030) with deep webbing to give it great strength. The bearings seat (bore) of the jaw stock is given very high finish using carbide tools. Housings : Cast Steel housings are provided to support the eccentric shaft and are fitted with heavy duty self aligning sperical roller bearings. Toggle Mechanism : C.I. Toggle Plates are used which act as a "fuse", in case of overloads. They are seated on tempered toggle bearings. Jaw Plates : Jaw Plates are made of high grade Chrome-Manganese steel and they can be reversed end to end, to give maximum life to each jaw plate. Side Wearing Plate : They are also made of high grade Chrome-Manganese Steel which saves the body from wearing. Fly Wheel : Well balanced large diameter flywheels (Flat and "V") are provided, which can be interchanged from side to side. Counter weights are added to balance the eccentricity of the Shaft. Lubrication : Grease nipples are provided at the right places for long life of the bearing. |
Application Jaw Crushers:
- Crushing Rocks
- Stone Crushers (For crushing stones)
Advantages
- Jaw Crushers is a economical unit designed for medium hard & lumpy material for time saving operation & greater output.
- It will ideally reduce irregularly shaped lumps of soft to medium even slightly damp in nature, to smaller sized lumps by inward – opposite rotating cam shaft with replaceable cams crush the material on the Stotted grate.
- Jaw Crushers are recommend to crush materials containing small percentage of lumps or agglomerates into uniform coarser material. Generally for lighter duties like mounting in-line with secondary grinding mill or de-agglomeration applications.
- Jaw Crushers is not suitable for hard materials like wood, stones, ores etc. Pre-Crusher is subjected to rigid Final Inspection and actual Crushing tests at our Experimental Station before it is delivered to the Stores for dispatch. Crushing Tests with your materials can also be carried out without obligation, to testing the suitability of the Crusher for your satisfaction.
Specifications
Specifications of Jaw Crusher
| CRUSHER RANGE | -- | -- | -- | -- |
| Size (Inches) | Motor Rating (H.P.) | Feed Size Max (Inches) | Average output in Brass (per 8 hrs.) | Speed (rpm) |
| 8 x 5 | 5 / 7.5 | 4 | 1 / 2 | 300 |
| 12 x 7 | 12.5 / 15 | 6 | 6 / 12 | 300 |
| 14 x 7 | 15 / 20 | 6 | 8 / 14 | 300 |
| 16 x 10 | 25 / 30 | 9 | 14 / 30 | 315 |
| 20 x 10 | 35 / 40 | 9 | 24 / 55 | 325 |
| 24 x 12 | 40 / 50 | 11 | 50 / 85 | 315 |
| PRIMARY CRUSHERS | -- | -- | -- | -- |
| 24 x 18 | 40 / 50 | 16 | 80 / 140 | 300 |
| 32 x 16 | 50 / 60 | 14 | 100 / 160 | 300 |
| 32 x 20 | 60 / 75 | 18 | 130 / 210 | 285 |
| 36 x 24 | 100 / 125 | 22 | 170 / 300 | 275 |
| 42 x 32 | 150 / 175 | 30 | 300 / 500 | 275 |
| SECONDARY CRUSHERS (Granulators) | -- | -- | -- | -- |
| 16 x 6 | 25 / 30 | 5 | 10 / 30 | 325 |
| 24 x 6 | 30 / 40 | 5 | 30 / 50 | 325 |
| 32 x 7 | 40 / 50 | 6 | 50 / 70 | 325 |
| 42 x 8 | 50 / 60 | 7 | 60 / 100 | 32 |
| NEW ADDITION | -- | -- | -- | -- |
| 32 x 10 | 50 | 9 | 50 / 90 | 32 |
| 32 x 12 | 50 | 11 | 60 / 100 | 31 |
| 48 x 36 | 175 / 200 | 34 | 400 / 600 | 275 |
